Free shipping on your first purchase of $50 or more
      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      • Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      • Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      • Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      • Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      • Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      • Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      • Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install
      1 / 7

      Reversible Riser System for Belt Grinder Sharpener – Dual Slider, No-Mod Install

      $38.99 USD

      • Worldwide shipping

      • Free returns

      • Carbon neutral

      • Secure payments

      Payment is fully encrypted · No card information stored · Secure and reliable, shop with confidence

      Product Introduction

      Ever finished sharpening a knife and felt like the angle was just slightly off — no matter how steady your hand was?

      We know the feeling. So we built a simple fix that makes a big difference.

      A reversible riser system designed specifically for belt grinder sharpeners. It elevates the base reference surface closer to the sharpening area on the belt, creating a more consistent and precise angle during the sharpening process. The kit includes two sliders — one low, one high — so you can fine-tune your setup for different blades and tools. With the high slider and the contact wheel in the middle position, you can sharpen at angles from 12° to 35°; the low slider covers roughly 15° to 35°. The reversible slider design adds flexibility, and the narrow end matches the belt's width for improved control. Installation takes seconds — simply slide it on from the right-hand side, no modifications needed. Built for sharpening enthusiasts who want more consistent, repeatable results from their belt grinder setup.

      ⭐ Customer Reviews

      Marcus T.
      M

      "This little riser completely changed my sharpening game. The angle is consistent every single time now. I wish I'd bought one months ago."

      ★★★★★
      Jenny R.
      J

      "Fits perfectly on my sharpener. The two sliders give me options for different knives — the low one for kitchen knives, the high one for outdoor blades. Very well thought out."

      ★★★★★
      David H.
      D

      "The reversible design is clever. I can flip the slider depending on the tool I'm sharpening. Installation literally takes two seconds — slides right on."

      ★★★★★
      Sarah K.
      S

      "I was skeptical about a 3D printed accessory, but the quality is excellent. Tight tolerances, no wobble. It feels solid and does exactly what it's supposed to."

      ★★★★★
      Tom W.
      T

      "Sharpening at low angles used to be a struggle. With the low slider, I can get down to 15 degrees consistently. My knives have never been sharper."

      ★★★★★
      Rachel B.
      R

      "Great addition to my sharpening setup. The riser is sturdy and the fit is precise. It also doubles as a handy work rest while I'm sharpening."

      ★★★★★
      Chris P.
      C

      "Ships fast and works exactly as described. I've tried other risers that were loose or didn't fit right. This one is a perfect fit and stays in place."

      ★★★★★
      Laura M.
      L

      "Bought this for my husband who's serious about his knives. He says it's one of the best small upgrades he's made to his sharpening setup. Highly recommend."

      ★★★★★

      Product Features

      📐 Elevates the Base Reference Surface — for a more consistent and precise angle. By raising the base closer to the sharpening area on the belt, it creates a more stable platform that helps maintain a consistent angle throughout the sharpening process.

      🔄 Two Sliders — Low and High — optimized for a wide range of blades and tools. The high slider covers 12° to 35° with the contact wheel in the middle position. The low slider (about 8mm lower) covers roughly 15° to 35°. Switch between them to match the blade you're working on.

      ↔️ Reversible Slider Design — added flexibility in one piece. Flip the slider to accommodate different tool shapes and blade profiles. The narrow end matches the belt's width for improved control and accuracy.

      🔧 No-Mod Installation — slides on and off in seconds. No tools, no drilling, no permanent changes. Simply slide the riser onto your sharpener from the right-hand side. It also doubles as a convenient work rest while sharpening.

      🏗️ Durable 3D-Printed Construction — tight tolerances, reliable performance. Built from sturdy PLA material for long-lasting use. Designed with insights from hundreds of Mk.1 risers, it features tighter tolerances and greater stability than earlier versions.

      Frequently Asked Questions

      Which sharpeners is this riser compatible with?
      This riser is designed for belt grinder sharpeners with a blade grinding attachment (Mk.2 generation). It does not fit the newer Elite Mk.2 model released in May 2024. Please check your sharpener model before ordering.
      What sharpening angles can I achieve with the two sliders?
      With the high slider and the contact wheel in the middle position, you can sharpen at angles from 12° to 35°. The low slider (about 8mm lower) covers roughly 15° to 35°. This range covers most kitchen knives, outdoor knives, and tools.
      Do I need any tools to install it?
      No. Installation is completely tool-free. Simply slide the riser onto your sharpener from the right-hand side. It comes off just as easily if you need to remove it.
      Can I use the riser as a work rest?
      Yes. While its primary purpose is to elevate the base for better angle consistency, many users find it doubles as a convenient work rest while sharpening. The flat top surface provides a stable platform for your blade.
      Is the riser durable enough for regular use?
      Yes. It's made from sturdy PLA material with tight tolerances for reliable, long-lasting performance. The design was refined over hundreds of units for the Mk.1 system, and this Mk.2 version features even greater stability and more consistent quality.

      Specifications

      • Type: Reversible riser system for belt grinder sharpeners
      • Compatibility: Belt grinder sharpeners with Mk.2 blade grinding attachment
      • Included sliders: 2 (one low, one high)
      • High slider angle range: 12° to 35° (contact wheel in middle position)
      • Low slider angle range: Approximately 15° to 35°
      • Low slider height difference: Approximately 8mm lower than high slider
      • Slider design: Reversible
      • Installation: Tool-free, slides on from right-hand side
      • Material: PLA (3D printed)
      • Color: Black
      • Best for: Sharpening enthusiasts, kitchen knives, outdoor knives, tools

      What's in the Box

      • 1 × Low Slider
      • 1 × High Slider
      • 1 × Riser Base

      ✨ Consistent angles, better edges — a small upgrade that makes a big difference.

      Ordering & Delivery

      Payment, Shipping & Dispatch Information

      International Payments

      Support for international credit card payments.

      When checking out, simply select the corresponding credit card payment method to complete the order.

      To enhance transaction security, depending on the requirements of your bank card issuer, some orders may need to undergo 3D Secure (3DS) verification.

      Global Distribution

      We offer global delivery services. Orders will be dispatched to the destination through appropriate international logistics channels to ensure that the goods can be safely delivered.

      The actual delivery time may be affected by:

      • The country or region where the goods will be received
      • International transportation routes
      • Customs clearance time
      • Local delivery efficiency
      • Holidays and weather conditions

      Some remote areas may temporarily be unable to receive deliveries. If your address cannot be arranged for transportation, we will contact you during the order processing.

      Delivery Instructions

      Regular standard specifications:

      Usually dispatched within approximately 5 working days after placing the order.

      Special specifications:

      Expected to be shipped progressively starting from October 1, 2026, and the goods will be released from storage in the order of the received orders.

      The actual delivery time may vary slightly depending on the selected size, color and inventory status.

      Please verify your sharpener model before ordering. This riser is designed for belt grinder sharpeners with the Mk.2 blade grinding attachment.